Shotblasting At Airplane Hangar To Prep Floor For Trowel Down Epoxy System

Coating Removal And Prep Concrete For Thin Mil Coating At Condo Complex

Scarify to remove heavy coating

Diamond Grind to remove remaining coating and prep surface.

After Grinding                                       After Edging

Diamond Grinding Surface for Thin Mil Coating Application

Failing Epoxy Coating due to Improper Surface Preparation

Shotblasting to remove most of the coating

On Left: Shotblasted Surface    On Right: Failing Coating

Floor is then scraped and ground to an acceptable surface 

Floor after contractor applied epoxy coating

Paint & Urethane Removal at University of Florida

Light shotblast to remove paint from concrete

Urethane deck coating removal with carbide slicers

Spray down/knock down coating removal and Prep for new coating

Old dirty coating ground down to bare concrete

Left: Prepared Surface           Right: Old Coating

Shotblast Removal of heavy Sylical Coating

Left: Blasted Surface  Right: Heavy Coating